Insulation

Magnet wire insulation codes decoded: PEW, UEW, EIW, AIW, PIW and more

What each enamel code means, its thermal class, and the jobs it suits.

Magnet wire insulation codes decoded: PEW, UEW, EIW, AIW, PIW and more

Key takeaways

  • PEW is polyester, UEW polyurethane, EIW polyesterimide, AIW polyamide-imide and PIW polyimide.
  • UEW is the only common enamel that solders through without stripping.
  • EI/AIW dual coat is the general-purpose choice for Class 200 motors and compressors.
  • PIW polyimide is the top of the range at Class 240.

The codes

Chinese and Japanese standards name enamel by a short code ending in W for wire. You will see the same codes on our spec sheets and on most supplier quotations.

CodeEnamelClassBest for
PVF / QQPolyvinyl formal105–120Oil-filled transformers, pickups
UEW / QAPolyurethane130–180Solderable small coils, relays, electronics
PEW / QZPolyester130–155General motors and transformers
EIW / QZYPolyesterimide180Class H motors and transformers
EI/AIW / QZY/XYPolyesterimide + polyamide-imide200–220Compressors, inverter motors, automatic winding
AIW / QXYPolyamide-imide220High-temperature, high-abrasion windings
PIW / QYPolyimide240Aerospace, traction, highest temperatures

Solderability

Polyurethane (UEW) decomposes cleanly in a solder bath at about 380–450 °C, so fine coils can be terminated without stripping. Every other enamel in the table needs mechanical stripping, chemical stripping or laser removal before soldering or welding.

Why dual coats exist

A polyesterimide base coat gives good adhesion and thermal life at reasonable cost. A thin polyamide-imide overcoat adds a tough, slippery surface that resists abrasion on automatic winders and resists refrigerant and oil attack. The combination reaches Class 200 or 220 at lower cost than a full polyimide build.

Builds: grade 1, 2 and 3

The same enamel can be applied in different thicknesses. Grade 1 (single) is thinnest and maximises copper fill. Grade 2 (heavy) is the most common. Grade 3 (triple) gives the highest breakdown voltage. In NEMA terms these correspond roughly to single, heavy and triple build.

How to specify

Write the enamel code, thermal class and grade together, for example "EI/AIW 200 grade 2". If you are not sure, tell us the application and operating temperature and we will recommend one. Browse enameled copper wire or enameled aluminum wire.

Frequently asked questions

What does EIW mean on magnet wire?

EIW is polyesterimide enameled wire, normally rated Class 180 (H).

Which magnet wire can be soldered without stripping?

Polyurethane (UEW) enameled wire. It strips in a solder bath at roughly 380–450 °C.

Need help choosing?

Send your application and operating temperature. We will recommend the wire and quote it.