

Copper magnet wire drawn from oxygen-free and electrolytic tough-pitch copper rod, annealed in-line and coated with polyester, polyurethane, polyesterimide, polyamide-imide or polyimide enamel. Round sizes run from 0.012 mm to 6.0 mm; rectangular and square profiles are drawn to customer dimensions.












| Product | Size range | Thermal class °C | MOQ |
|---|---|---|---|
| Enameled Round Copper Wire | 0.025–6.0 mm (AWG 4–50) | 130, 155, 180, 200, 220 | 300 kg per size |
| Enameled Rectangular Copper Wire | a 1.0–10 mm × b 3.0–16 mm | 130, 155, 180, 200, 220 | 300 kg per size |
| Enameled Square Copper Wire | a(b) 0.4–7.0 mm | 180, 200, 220 | 300 kg per size |
| Ultra-Fine Enameled Copper Wire | 0.012–0.2 mm (AWG 32–56) | 105, 130, 155, 180 | 50 kg per size |
| Ultra-Fine Rectangular Copper Wire | a 0.1–0.6 mm × b 0.2–6.0 mm | 180, 200, 220 | 100 kg per size |
| Self-Bonding Enameled Copper Wire | 0.012–0.8 mm | 155, 180 | 50 kg per size |
We make 0.025 mm to 6.0 mm diameter, which covers roughly AWG 4 to AWG 50. Sizes outside that range can be quoted on request.
Thickness (a) 1.0–10 mm and width (b) 3.0–16 mm. Keep the width-to-thickness ratio at or below about 8 for stable enameling; wider profiles are quoted case by case.
Side lengths from 0.4 mm to 7.0 mm. Corner radius follows IEC 60317 unless you specify otherwise.
0.012 mm, which is finer than AWG 56. The most common fine sizes are AWG 42 to AWG 53.
0.1 mm thick, with widths from 0.2 mm up to 6.0 mm.
Pass a current through the finished coil, heat it with hot air or in an oven, or wipe it with alcohol while winding. The best method depends on the bond coat grade and coil size.

Get a free quote
Send size, insulation, thermal class and quantity. An engineer confirms the specification, quotes price and lead time, and offers a free sample.