

Square enameled copper wire, side 0.4–7.0 mm, Class 180 to 220 polyimide and polyamide-imide enamels for motors, transformers and instruments.
| Size range | a(b) 0.4–7.0 mm |
|---|---|
| Conductor | Annealed copper, Cu ≥ 99.95% |
| Thermal class | 180, 200, 220 °C |
| Standards | IEC 60317, NEMA MW 1000, JIS C 3202, GB/T 6109 |
| MOQ | 300 kg per size |
| Lead time | 15–30 days |
Square wire packs as tightly as flat wire but winds like round wire because it has no preferred bending direction. It is common in motor stators, inverter chokes and precision instrument coils where space is tight.
We supply sides from 0.4 mm to 7.0 mm with Class 180, 200 and 220 enamel systems. The Class 220 grade 1 polyimide version is the one specified most often for high-temperature motors.
Square turns leave almost no void space in stator slots.
Equal sides mean the wire does not twist or roll on the former.
Polyimide grade 1 rated to 220 °C for compact, hot-running designs.
Imide-based coatings resist varnish solvents during impregnation.
| Conductor | Annealed copper, Cu ≥ 99.95% |
|---|---|
| Side length a(b) | 0.4–7.0 mm |
| Insulation | PEW, EIW, AIW, EI/AIW, PIW |
| Thermal class | 180, 200, 220 °C |
| Enamel build | Grade 1 or Grade 2 |
| Enamel source | ELANTAS or equivalent |
| Standards | IEC 60317, NEMA MW 1000, JIS C 3202, GB/T 6109 |
| Certification | UL, ISO 9001, ISO 14001, RoHS, SGS |
| Packing | Plastic spools or 150 kg wooden spools |
| MOQ | 300 kg per size |
| Lead time | 15–30 days |
Sizes and builds outside this table can be made on request. Tell us the dimension, insulation and standard and we will confirm feasibility.
| Spools | Plastic spools or 150 kg wooden spools |
|---|---|
| Outer packing | Cartons or fumigation-free wooden pallets, moisture-proof film |
| Labels | Size, insulation, thermal class, net weight, lot number, date; OEM labels available |
| MOQ | 300 kg per size |
| Lead time | 15–30 days |
| Trade terms | FOB Shanghai, CIF, DAP; T/T or L/C at sight |
| Samples | Free sample spool with test report |
Side lengths from 0.4 mm to 7.0 mm. Corner radius follows IEC 60317 unless you specify otherwise.
Use square wire when the coil must bend in more than one direction or when you want flat-wire fill on a winder set up for round wire.
Class 220 polyimide or polyesterimide with polyamide-imide overcoat as standard. Class 240 polyimide can be quoted for selected sizes.