

Flat enameled copper winding wire, thickness 1.0–10 mm and width 3.0–16 mm, Class 130 to 220, for transformers, traction motors and welding machines.
| Size range | a 1.0–10 mm × b 3.0–16 mm |
|---|---|
| Conductor | Annealed copper, Cu ≥ 99.95% |
| Thermal class | 130, 155, 180, 200, 220 °C |
| Standards | IEC 60317, NEMA MW 1000, JIS C 3202, GB/T 6109 |
| MOQ | 300 kg per size |
| Lead time | 15–30 days |
Rectangular wire fills a winding window far better than round wire: there are no gaps between turns, so the same coil carries more copper and runs cooler. We roll and draw the conductor to your thickness (a) and width (b), radius the corners to protect the enamel, and coat it with polyester, polyesterimide, polyamide-imide or polyimide.
Typical orders include 3 × 11 mm strip for spot-welding transformers, 3 × 8 mm for rewinding three-phase compressor motors, and 4 × 9 mm for distribution transformer low-voltage windings.
Flat turns stack without voids, so slot and window fill rises compared with round wire.
Rounded edges prevent enamel thinning at the corners, the usual failure point in flat wire.
Soft temper allows tight edgewise bends for helical coils and hairpin forming.
Thickness and width held to ±0.03–0.07 mm depending on size.
| Conductor | Annealed copper, Cu ≥ 99.95% |
|---|---|
| Thickness (a) | 1.0–10.0 mm |
| Width (b) | 3.0–16.0 mm, recommended b/a ≤ 8 |
| Corner radius | Full or specified radius to IEC 60317-0-2 |
| Insulation | PEW, EIW, AIW, EI/AIW, PIW |
| Thermal class | 130, 155, 180, 200, 220 °C |
| Enamel build | Grade 1 or Grade 2 |
| Standards | IEC 60317, NEMA MW 1000, JIS C 3202, GB/T 6109 |
| Certification | UL, ISO 9001, ISO 14001, RoHS, SGS |
| Packing | 30/50/150 kg wooden spools |
| MOQ | 300 kg per size |
| Lead time | 15–30 days |
Sizes and builds outside this table can be made on request. Tell us the dimension, insulation and standard and we will confirm feasibility.
| Spools | 30/50/150 kg wooden spools |
|---|---|
| Outer packing | Cartons or fumigation-free wooden pallets, moisture-proof film |
| Labels | Size, insulation, thermal class, net weight, lot number, date; OEM labels available |
| MOQ | 300 kg per size |
| Lead time | 15–30 days |
| Trade terms | FOB Shanghai, CIF, DAP; T/T or L/C at sight |
| Samples | Free sample spool with test report |
Thickness (a) 1.0–10 mm and width (b) 3.0–16 mm. Keep the width-to-thickness ratio at or below about 8 for stable enameling; wider profiles are quoted case by case.
Yes. 3 × 11 mm is a regular size for spot-welder secondaries, usually in Class 180 or 200 enamel.
For the same window, flat wire raises the copper fill and improves heat transfer between turns. Round wire is cheaper to wind and is still the better choice for small coils.