

Round copper magnet wire from 0.025 mm to 6.0 mm with polyester, polyurethane, polyesterimide or dual-coat polyamide-imide enamel, Class 130 to 220.
| Size range | 0.025–6.0 mm (AWG 4–50) |
|---|---|
| Conductor | Annealed electrolytic copper, Cu ≥ 99.95% |
| Thermal class | 130, 155, 180, 200, 220 °C |
| Standards | IEC 60317, NEMA MW 1000, JIS C 3202, GB/T 6109 |
| MOQ | 300 kg per size |
| Lead time | 7–30 days |
This is the workhorse winding wire for motors, transformers, relays and inductors. We draw electrolytic copper rod to size, anneal it in-line so it stays soft through automatic winding, then apply the enamel in multiple thin passes until the specified build is reached.
Choose the insulation by the job: solderable polyurethane (UEW) for small coils you tin without stripping, polyesterimide (EIW) for general Class 180 motors, or polyesterimide with a polyamide-imide overcoat (EI/AIW) for Class 200–220 windings, refrigerant compressors and inverter-fed motors.
In-line annealing keeps elongation high so the wire runs on high-speed winders without necking or springback.
Multi-pass dies keep enamel build uniform, which is what holds breakdown voltage and pinhole counts in spec.
UEW grades strip in the solder pot at 380–450 °C, saving a mechanical stripping step on small coils.
EI/AIW dual coat survives hermetic compressor oils and refrigerants.
| Conductor | Annealed electrolytic copper, Cu ≥ 99.95% |
|---|---|
| Diameter range | 0.025–6.0 mm (AWG 4–50, SWG 8–47) |
| Insulation | PEW, UEW, EIW, EI/AIW, AIW, PIW |
| Thermal class | 130, 155, 180, 200, 220 °C |
| Enamel build | Grade 1, Grade 2, Grade 3 (single, heavy, triple) |
| Standards | IEC 60317, NEMA MW 1000, JIS C 3202, GB/T 6109 |
| Certification | UL, ISO 9001, ISO 14001, RoHS, SGS |
| Color | Natural amber; red, green, blue on request |
| Packing | PT-4 to PT-200 plastic spools; 30/50 kg wooden spools |
| MOQ | 300 kg per size |
| Lead time | 7–30 days |
Sizes and builds outside this table can be made on request. Tell us the dimension, insulation and standard and we will confirm feasibility.
| Spools | PT-4 to PT-200 plastic spools; 30/50 kg wooden spools |
|---|---|
| Outer packing | Cartons or fumigation-free wooden pallets, moisture-proof film |
| Labels | Size, insulation, thermal class, net weight, lot number, date; OEM labels available |
| MOQ | 300 kg per size |
| Lead time | 7–30 days |
| Trade terms | FOB Shanghai, CIF, DAP; T/T or L/C at sight |
| Samples | Free sample spool with test report |
We make 0.025 mm to 6.0 mm diameter, which covers roughly AWG 4 to AWG 50. Sizes outside that range can be quoted on request.
Class F is 155 °C. Polyester (PEW) or polyurethane rated 155 works, but many builders specify polyesterimide (EIW, Class 180) to gain thermal margin at little extra cost.
Yes, if you order polyurethane (UEW) insulation. It strips in a solder bath at about 380–450 °C. Polyesterimide and polyamide-imide must be stripped mechanically or chemically.