

C1100, C1020 and C10200 copper foil and strip, 0.1–3.0 mm thick and 20–1000 mm wide, deburred edges, for foil-wound transformer and reactor windings.
| Size range | 0.1–3.0 mm thick; 20–1000 mm wide |
|---|---|
| Conductor | C1100 / C11000 (ETP), C1020 / C10200 (OFC), TU1, TU2 |
| Thermal class | – |
| Standards | ASTM B152, EN 13599, GB/T 5187 |
| MOQ | 1,000 kg |
| Lead time | 15–30 days |
Foil windings replace many turns of wire with a single wide copper sheet per turn, which spreads current evenly across the winding height and handles short-circuit forces well. Low-voltage windings of dry-type and oil-immersed distribution transformers are commonly foil-wound.
We slit oxygen-free (C1020/C10200, TU1/TU2) and ETP (C1100/C11000) copper to width, deburr and round the edges so the edge does not cut the interlayer insulation.
Rounded edges protect interlayer insulation.
Even foil gives uniform current distribution.
OFC for high-conductivity and welding applications.
Any width from 20 mm to 1000 mm.
| Material | C1100 / C11000 (ETP), C1020 / C10200 (OFC), TU1, TU2 |
|---|---|
| Purity | Cu ≥ 99.90% (ETP), ≥ 99.95% (OFC) |
| Thickness | 0.1–3.0 mm |
| Width | 20–1000 mm |
| Temper | O (soft), 1/4H, 1/2H |
| Edge | Deburred and rounded |
| Standards | ASTM B152, EN 13599, GB/T 5187 |
| Certification | ISO 9001, ISO 14001 |
| MOQ | 1,000 kg |
| Lead time | 15–30 days |
Sizes and builds outside this table can be made on request. Tell us the dimension, insulation and standard and we will confirm feasibility.
| Spools | Plastic or wooden spools by weight |
|---|---|
| Outer packing | Cartons or fumigation-free wooden pallets, moisture-proof film |
| Labels | Size, insulation, thermal class, net weight, lot number, date; OEM labels available |
| MOQ | 1,000 kg |
| Lead time | 15–30 days |
| Trade terms | FOB Shanghai, CIF, DAP; T/T or L/C at sight |
| Samples | Free sample spool with test report |
C1100 (ETP) is standard. C1020 oxygen-free copper is chosen when the foil is welded or brazed, or when the highest conductivity is required.
0.1–3.0 mm thick and 20–1000 mm wide.
Yes. Edges are deburred and rounded as standard for winding applications.